Aantar Books
Pay Bills
Pay one vendor's open bills — in full or in part — taking early-payment discounts and setting their credits against them, from the bank or card account you choose.
Where: Vendors ▸ Pay Bills · Home ▸ Vendors ▸ Pay Bills
Pay Bills records paying your vendors. Choose a vendor, tick the bills you are paying and how much of each, take any early-payment discount their terms allow, set their credits against the bills, and say which account the money comes from. Aantar Books records one payment against each bill, lowers what you owe the vendor, and takes the money out of the bank or card account.
Opening Pay Bills
- Vendors ▸ Pay Bills, or Pay Bills on the Home Page, opens the list of every vendor you owe, with Pay beside each (the same list as Vendor Balances). Choose Pay beside the vendor.
- From an open bill, Pay $… pays that one bill. See Pay one bill from the bill.
The page is titled Pay Bills · vendor name.
Note: Pay Bills has the list of open bills with Amt. Due, Disc. and Amt. To Pay, Select All Bills and Clear Selections, the discount and credits, the payment date, method and account, then Pay Selected Bills. Aantar Books opens it for one vendor at a time from the list of vendors owed.
Pay bills, step by step
- Open Vendors ▸ Pay Bills and choose Pay beside the vendor.
- Tick the bills you are paying under BILLS, or choose Select All Bills. Each ticked bill's Amt. To Pay starts at what it owes. Change it to pay part of a bill. You can instead type the total into Payment Amount: Aantar Books spreads it over the bills, oldest first, and ticks the ones it reaches.
- Check the Payment Date.
- Choose the Payment Account the money comes from (shown when you have more than one bank or card account).
- Choose how you paid under PAID BY.
- For a cheque, check the Cheque no. — Aantar Books fills in the next cheque number of the payment account — or tick To be printed to number it when you print it. For other methods type the Reference / Auth no. Add a Memo if you want.
- Under EARLY-PAYMENT DISCOUNTS, tick any discount you are taking, and choose the Discount account.
- Under VENDOR CREDITS, tick any credit to set against the ticked bills.
- Check the totals along the bottom, then choose Pay Selected Bills.
Aantar Books confirms $… paid to vendor across N bill(s). and closes the page.
The top of the page
| Field | What to enter / what it means |
|---|---|
| PAID TO | The vendor, in boxes: their name in large type in a box, with their phone numbers and contact person under it, and their address in the ADDRESS box to its right (blank ones are left out; on a narrow window the address goes under the name). The number of open bills is beside BILLS. Under the boxes, You owe $… as a badge — red while you owe them anything, green when you owe nothing — and Credits $… in green when they have given you credits you have not used. |
| Payment Amount | The money you are paying. It follows the bills you tick. Typing a figure spreads it across the bills, oldest first. |
| Payment Date | The date of the payment. It decides whether a bill still qualifies for its early-payment discount. |
| Payment Account | The bank or credit card account the money leaves. It starts on the account set in Edit ▸ Preferences ▸ Checking ("Open the Pay Bills form with"), or the account you used last, and follows the method you choose until you pick an account yourself. Paid by Credit, it starts on the card you last paid bills with, or — until you have — the Company credit card in Accounting Setup. Shown when there is a choice. |
| Cheque no. / Reference / Auth no. | The cheque number, or the e-transfer confirmation or card authorization. For a cheque it starts on the payment account's next cheque number, as Write Cheques does, and changes with the account until you type your own. It is kept on each payment, so it shows in the payments list and the vendor's ledger. |
| To be printed | Shown for a cheque. Ticked, the cheque has no number yet: it waits in Print Cheques, which numbers it when it prints. |
| Memo | A note for the payment. |
| PAID BY | How you paid: the payment methods switched on in your Payment Method List, with Debit and Credit in place of a single card method. |
The bills
| Column | What it shows |
|---|---|
| Tick box | Tick to pay this bill. |
| Date | The bill date. Bills are listed oldest first. |
| Bill | The vendor's invoice number (or Bill #…). A General Journal line that credits Accounts Payable for this vendor is listed as a bill too, shown as GJ and its number. |
| Amt. Owed | What the bill still owes. |
| Disc. | The early-payment discount you are taking on it. Shown when any bill has one. |
| Amt. To Pay | How much of this bill you are paying. Editable once the bill is ticked. |
Select All Bills ticks every bill at its full amount; Clear Selections unticks them all.
Pay Bills lists only bills whose goods are Received, which is every bill Aantar Books enters now. A bill saved as Pending by an earlier version, and goods received with the bill to follow, do not appear until the bill is received or entered.
Early-payment discounts
A bill raised on terms with a discount (such as 2% 10 Net 30 from the Terms List) qualifies while the payment date is within the discount period. Each qualifying bill has a line under EARLY-PAYMENT DISCOUNTS: Take $… off bill — term, by date. Ticking it ticks the bill and reduces its Amt. To Pay by the discount. Choose the Discount account the discounts go to; it starts on the account set in Edit ▸ Preferences ▸ Bills.
Changing the Payment Date re-checks which bills still qualify.
The discount is recorded as a journal against the bill: Accounts Payable is debited and the discount account credited.
Setting credits against bills
Every open credit the vendor has is listed under VENDOR CREDITS: debit notes and vendor credits, General Journal credits, and bills paid for more than they now total (Overpaid bill …). Tick a credit to use it. Ticked credits are set against the ticked bills, oldest bill first, before any money moves, and the Payment Amount drops to what is left to pay. A credit moves no money.
If the vendor has no credits, the section says … has no open debit notes or credits to apply.
The totals and buttons
| Item | What it shows / does |
|---|---|
| BILLS TICKED | The ticked bills, before discounts and credits. |
| DISCOUNTS | Discounts taken. |
| CREDITS | Credits set against the bills. |
| TOTAL TO PAY | The money that leaves the account. |
| Cancel | Leaves without paying. Nothing is recorded. |
| Pay Selected Bills | Records everything: discounts first, then credits, then the payment — one bill payment, under one number, however many bills it pays, so a cheque is one cheque. If you ticked To be printed, the message adds The cheque is waiting in Print Cheques. |
If one part fails (for example one bill's payment is refused), Aantar Books says what was paid and what was NOT paid, reloads the bills, and leaves the rest ticked so you can try again. A payment that did go through is never recorded twice.
Pay one bill from the bill
On a saved bill that still owes money, Pay $… opens Pay bill number:
| Field | What it means |
|---|---|
| Amount | What you are paying; it starts at what the bill owes. You cannot pay more than it owes: This bill only has $… outstanding. To pay several bills at once, use Pay Bills. |
| METHOD | How you paid. |
| Payment Account | The account the money leaves. |
| VENDOR CREDITS | The vendor's credits; tick one to set it against this bill first. |
| Cheque no., authorization or note (optional) | A single word or number is kept as the cheque number or authorization; a sentence is kept as a note. |
Choose Record payment.
A bill in another currency
For a bill entered in the vendor's currency, the Amount in USD (or their currency) is what you type, and Rate on the day it moved is the rate the payment converted at (it starts at the bill's rate). Aantar Books shows Leaves the bank: $…, and if the rate has moved, the exchange loss or gain it will record rather than leaving the difference on the vendor's account. The rate is required: Enter the rate the payment converted at.
Edit a bill payment
To change a bill payment you already made — a wrong amount, date, account, method or cheque number, or a bill paid by mistake:
- Open the payment: Vendors ▸ Vendor Centre, choose the vendor, and double-click the payment (or open it from the bank account's register or a report). It opens as a Bill Payment, never a "Receipt": at the top left, PAID TO with the vendor's name in a box and their address in a box to its right; right under them, one row of boxes: Date, Reference #, Cheque #, Card ref, Method and Paid from (with Change), in that order. WHAT THIS SETTLED is a grid of every bill it paid (DATE, NUMBER, ORIG. AMT. and AMT. PAID) with TOTAL OF THIS PAYMENT under it; click a bill's number (or its line) to open the bill, and come back to open another. On the right, PAID and AMOUNT FOR SELECTED DOCUMENTS, then Reprint Cheque, Edit payment… and Delete payment…. Its text is a size larger than the other screens'.
- Click Edit payment…. Pay Bills opens with that payment: its bills ticked at what it paid on each, and a bill it paid in full back on the list.
- Change what you need: untick a bill, change an Amt. To Pay, the Payment Date, the method under PAID BY (the Payment Account follows the method, as on a new payment), the account, or the Reference / Auth no. (cheque number).
- Click Save Payment.
The payment keeps its number and cheque number; the bills owe what they should again, and the bank account moves by the new total. Files attached to the payment stay with it.
A payment that applied a vendor credit or an early-payment discount, one in a foreign currency, or a cheque still waiting in Print Cheques cannot be changed this way: delete it and pay the bills again. A payment in a closed period or already reconciled cannot be changed either; nothing is changed, and Aantar Books says why.
What happens in the books
Each bill payment debits Accounts Payable (the vendor's account) and credits the payment account. A foreign-currency payment relieves Accounts Payable at the rate the bill was carried at and books the difference to exchange gain or loss. Discounts and credits reduce the bill without moving money. The payment's date decides the period; a date on or before your closing date is refused.
Printing the cheque
A bill payment paid by cheque can be printed two ways:
- Later, with others: tick To be printed on Pay Bills. The payment waits in File ▸ Print Forms ▸ Cheques (Print Cheques) beside the cheques from Write Cheques, listed as Bill Pmt, and is numbered from the first cheque number in the printer.
- From the payment: open the payment (from the vendor's ledger, the bill's payments or All Payments). The receipt says where its cheque stands — To be printed, or Cheque 1002 · printed Sep 29, 2026 by … — and offers:
| Button | What it does |
|---|---|
| Print Cheque… | For a cheque not printed yet. Asks for the Cheque number (it starts on the number the payment already has, or the account's next cheque number), then the cheque stock, and prints it. A number already used on that account is refused. |
| Reprint Cheque | For a cheque already printed: Reprint cheque 1002? It prints again with the same number, and the receipt records the reprint — reprinted 1 time, last Sep 29, 2026 by …. |
The cheque shows the vendor, their address, the amount in figures and words, and on the stub each bill it pays.
Printing cheques needs Record Supplier Payment or Write Cheques.
Note: To be printed and Cheque no. set how the bill payment cheque is printed and numbered. Reprinting a cheque from the form keeps its number, and Aantar Books keeps who reprinted it and when.
Permissions
Paying bills needs Record Supplier Payment. See Roles and permissions explained.
Messages you may see
| Message | What to do |
|---|---|
| Tick the bills this payment is for. | Tick at least one bill. |
| … is ticked with no amount. | Type an amount for that bill or untick it. |
| … only owes $…. | Reduce the amount (the discount counts towards it). |
| Choose the account the discounts go to. | Choose the Discount account. |
| Enter an amount greater than zero. | (Paying from the bill.) Type the amount. |
Common problems
A bill is not listed. It is Pending, it came in as an item receipt still waiting for its bill, or it is already paid. See Enter Bills and Enter Bill for Received Items.
No discount is offered. The bill has no term with a discount, or the payment date is after the discount date. The term must be chosen from the Terms List on the bill; a number of days typed by hand carries no discount.
The money came from the wrong account. Change the payment's account in the payments list (Edit Payment), or delete the payment and pay again.
Related articles
- Vendor Balances
- Enter Bills
- Enter Vendor Credits
- Print Cheques
- Terms List
- All Payments
Related articles
Something unclear or out of date? Write to support@aantar.com and name this page.