Aantar

Aantar POS

Cash drawer

Connect the cash drawer through the receipt printer's drawer port, choose the pin it opens on, and test it.

Where: More ▸ Till settings ▸ Hardware ▸ Cash drawer · More ▸ Till settings ▸ Cash

The cash drawer is plugged into the receipt printer's drawer port, usually marked DK. When the till takes cash, opens a shift or records a No sale, it tells the printer to open the drawer. Card and account payments leave it shut.

Before you start

  • The receipt printer works (see Receipt printer).
  • The drawer's cable is in the printer's drawer port.

Choose the pin and test

  1. Press More, then Till settings, then Hardware.
  2. Under Cash drawer, choose Both pins.
  3. Under Test the devices, press Open the drawer. The drawer opens.
  4. If it does not open, choose Pin 2 and try again, then Pin 5. Most drawers open on pin 2, some on pin 5. There is no need to save before trying.
  5. Keep the choice that works and press Save.

Drawer settings

Under Till settings, Cash:

  • Drawer: One per till (the drawer belongs to the station) or Cashier's choice.
  • Blind count: at close, the cashier counts without seeing the expected amount.
  • Opening float: the float the till proposes when a shift opens.
  • Drop due above: the cash level at which the till shows Drop due (Cash drop to the safe).
  • Cash rounding to 5¢ (Cash rounding to the nickel).

Press Save after a change.

If something goes wrong

  • The drawer does not open on any pin: check the cable is in the printer's drawer port, not a network or phone socket, and that the printer prints.
  • The drawer opens at the wrong time: check which keys open it. Only cash payments, shift opening and closing, paid in and out, drops and No sale open it.

See The receipt printer does not print, or the drawer does not open.

Related articles

Something unclear or out of date? Write to support@aantar.com and name this page.