Aantar

Aantar POS

Receipt printer

Connect an ESC/POS receipt printer by network or USB, choose the paper width, test it, and make it this till's printer.

Where: More ▸ Till settings ▸ Printers · More ▸ Till settings ▸ Hardware

The till prints receipts, X reads, Zs and slips on a thermal receipt printer beside the lane. The cash drawer opens through the same printer. Each station has its own printer.

Printers that work

  • Thermal receipt printers that use the ESC/POS standard.
  • Connected by network cable (the printer listens on port 9100), or by USB with the Windows driver Epson TM or Generic / Text Only.
  • Paper 80 mm (48 characters a line), 72 mm (42) or 58 mm (32).

Before you start

  • Give a network printer a fixed address in the router, and write it down.
  • Sign in as a manager, or have a supervisor's PIN ready (Printers needs the printer set-up permission).

Add the printer

  1. Press More, then Till settings.
  2. Press Printers (or Hardware, then Open Printers).
  3. Add the printer: its connection (network address and port, or the USB printer's Windows name) and the paper size.
  4. Press Test Printer. A test slip prints.
  5. Press Save, and make it the default printer (the star).
  6. Press Back. Hardware now says Prints to and the printer's name.

If no printer is set up, Hardware says No receipt printer is set up. Add one in Printers.

Test it from the till

  1. Press More, then Till settings, then Hardware.
  2. Under Test the devices, press Print a test receipt. A test slip prints and is cut, and the till says Works.

If something goes wrong

  • Nothing prints and the till says Did not answer: check that the printer is on, has paper and its lid is shut, and that the address is right. A network printer and the till must be on the same shop network.
  • Characters are cut at the right: the paper size set does not match the paper. Change it in Printers.

See The receipt printer does not print, or the drawer does not open.

Related articles

Something unclear or out of date? Write to support@aantar.com and name this page.