Aantar POS
Weighing scale
Connect a legal-for-trade scale by USB or serial, choose the unit, and check that the till reads the same weight as the scale.
Where: More ▸ Till settings ▸ Weighing Scale · More ▸ Till settings ▸ Hardware ▸ Test the devices
A scale at the lane weighs produce and bulk items. When a weighed item is rung, the till waits for a settled weight from the scale and prices the line by it. The scale is the legal measuring device: it must carry its Measurement Canada approval, and the till never rounds the weight the scale reports.
Scales that work
- USB scales, which appear by themselves.
- Serial (RS-232) scales, which appear as the COM port their cable is on.
- Network scales, added by address.
Connect the scale
- Plug the scale in and switch it on.
- Press More, then Till settings, then Weighing Scale. A cashier needs a supervisor's PIN.
- Under Detected scales, find the scale and press Connect. It then shows Connected.
- No scale listed: the page says No scale found. Check the cable and power, and press Scan again.
- A network scale: press Add network scale, type the IP address or host and the Port, and press Use this scale.
- Put a known weight on the scale. The page shows the weight on the scale.
- Under Units, choose the unit weighed items are priced in: kilograms, grams, pounds or ounces. The scale's reading is converted to it.
- If a serial scale sends a bare number with no unit, set Serial scales that send no unit to say what the number means.
Check it from the till
- Press More, then Till settings, then Hardware.
- Under Test the devices, press Read the scale. The weight shown must match the scale's own display.
- Ring a weighed item with a known weight on the scale, for example bananas:
4011then PLU.
Without a scale
A station with no scale asks the cashier to key the weight. A keyed weight needs the permission Type a weight by hand (supervisors and managers have it). See Key the weight by hand.
If something goes wrong
The entry line shows the scale's state beside it, for example settling while the weight moves. If the till never gets a settled weight, see The scale does not weigh.
Related articles
Something unclear or out of date? Write to support@aantar.com and name this page.