Aantar

Aantar POS

Sell a weighed item on the scale

Ring produce and bulk items sold by the kilogram on a connected scale, with tare where the container needs it.

Where: The selling screen

An item sold by weight, such as loose produce or bulk nuts, rings at its price per kilogram times the weight on the scale. With a scale connected to the lane, the till reads the weight itself and rings the line as soon as the weight settles.

Before you start

  • The scale is connected and set up in Till settings > Weighing Scale. See Weighing scale.
  • The pan is empty and reads zero.

Steps

  1. Ring the item by its PLU (bananas: 4011 and PLU), its quick key, or a product key. The entry line box shows WEIGHT and the hint says to put the item on the scale.
  2. The band says the item's name and waiting for a settled weight on the scale. The live weight shows beside the entry line, for example Scale 0.642 kg, settling.
  3. Put the item on the scale. If it is in a container that has a tare key, touch the tare key in the band (for example Tare 0.010). The tare is taken off the weight.
  4. When the reading settles (Scale 0.642 kg), the line rings by itself: the weight, the price per kg and the amount.

To change your mind, press Cancel in the band (or Clear). Nothing is rung.

What the line shows

A weighed line shows its weight in place of a quantity, for example 0.642 kg, the price per kg and the line total. Its promotion and any linked charge show under it as for any line.

If something goes wrong

What happens What to do
The weight stays at settling Make sure nothing touches the pan or the counter.
The line does not ring with the item on the pan The weight is not above the tare. Check the tare key, or take it off.
The band says no scale. Key the weight The till cannot read the scale. Key the weight by hand (a supervisor approves), and see The scale does not weigh.

Important: A scale used for trade must be approved by Measurement Canada and inspected. The till takes the weight the scale reports.

Related articles

Something unclear or out of date? Write to support@aantar.com and name this page.