Aantar POS
The scale does not weigh
What to do when the till says there is no scale, the weight never settles, or a weighed item will not ring.
Where: More ▸ Till settings ▸ Weighing Scale · More ▸ Till settings ▸ Hardware
The till reads the weight from a scale connected by serial or USB cable, and rings a by-weight item only on a settled weight. When the scale cannot be read, the till says so and lets you key the weight by hand, with a supervisor's approval where the role needs one, so the customer is not kept waiting.
The till says "no scale"
Symptom: a by-weight item shows the band with the item's name and no scale. Key the weight (642 is 0.642 kg), then Weight.
Likely cause: the scale is off, its cable is loose, or the scale is not set up on this till.
- To serve the customer now, key the weight in grams and press Weight. If your role may not key weights, a supervisor approves with a PIN. See Key the weight by hand.
- After the sale, check that the scale is switched on and shows zero with the pan empty.
- Check the cable at both ends. If the scale uses a USB-to-serial adapter, plug it back into the USB port it was set up on: in another port Windows may give it a different port number.
- Press More ▸ Till settings ▸ Hardware. Under Test the devices, press Read the scale. Works means the till reaches the scale; Did not answer means it does not.
- If it does not answer, press the Weighing Scale tile in Till settings and check the scale chosen for this till and its port. See Weighing scale.
The weight never settles
Symptom: the band keeps saying waiting for a settled weight on the scale, or the weigh panel stays at Settling.
Likely cause: something touches the pan, the counter moves, or there is a draught on the scale.
- Make sure nothing rests on or against the pan, and that the customer is not leaning on the counter.
- Wait for the weight to settle (Stable on the weigh panel). The till rings the item only on a settled weight.
- If the weight never settles, switch the scale off and on with the pan empty, so it zeroes again.
The item will not ring with something on the pan
Likely cause: the weight is not above the tare, or the item is not set up as sold by weight.
- Check the tare. Take it off if the item is not in a container.
- If the item rings as one unit instead of asking for a weight, it is not set as sold by weight in the catalogue. Tell a manager. See Weighed items and price-embedded labels.
A tiny weight
Symptom: the till asks a weight in grams followed by is that right?
Likely cause: the weight is very small, so the till checks that it is meant.
- Check that the item is on the pan and the reading is right.
- Confirm it, or take the item off and weigh it again.
Important: A scale used for trade must be approved by Measurement Canada and inspected. The till takes the weight the scale reports and does not round it.
If something goes wrong
If Read the scale still says Did not answer after the checks above, note the scale's make and model and how it is connected, and see Getting help from Aantar.
Related articles
Something unclear or out of date? Write to support@aantar.com and name this page.